Home/Products/PerimGrille FF-250
PerimGrille FF-250 · Submersible Fiber-Optic Security Grille

Close the Perimeter Beneath the Waterline—and Inside Every Conduit.

Seal culverts, stormwater drains, and utility tunnels where ground fences stop at the bank. PerimGrille FF-250 places a custom-sized 0 W stainless-steel grille underwater year-round to report 60–80 mm prying deformation, bar cutting, and panel removal across 3 mounting styles.

Send your culvert, channel, or shaft dimensions for a custom grille layout and equipment supply quote.
FF-250 Stainless Grille · 0 W Passive01020304
01Ground-level perimeter fence
02Waterline · Year-round submerged culvert
03FF-250 stainless grille · 0 W passive
04Above-water IP66 processor (1 per zone)
Submerged Wet-Zone Duty
0 W
Corrosion-resistant stainless grille operates fully underwater year-round
Multi-Vector Breach Catch
3 Paths
Embedded optical pry sensing, internal anti-cut line, and panel tamper
Forced-Opening Threshold
60–80 mm
Bar deformation trigger built to withstand heavy water-flow impact
Dredging and Service Access
3 Mounts
Custom-sized fixed, rail-guided sliding, or hinged swing-door frames
01 — Key capabilities

Twelve Reasons Critical Infrastructure Specs FF-250 for Openings

01

Engineered to Survive Below the Waterline

01

Year-Round Submerged Duty

Operate 0 W sensing grilles completely underwater across flooded culverts and drainage channels.

02

Corrosion-Resistant Steel

Build rigid barriers in corrosion-resistant stainless steel for sustained wet-conduit exposure.

03

Water-Impact Rigidity

Withstand heavy stormwater and canal flow impact without structural collapse or false triggers.

04

Thermal-Stress Adaptation

Absorb normal expansion and contraction stresses automatically across seasonal water-temperature shifts.

02

Three Independent Paths from Attack to Alarm

05

60–80 mm Pry Trigger

Detect pulling and crowbar prying when grille deformation reaches 60–80 mm.

06

Embedded Optical Sensing

Convert mechanical bar strain directly into optical signal shifts inside sealed bars.

07

Through-Bar Anti-Cut Line

Trigger an immediate cut alarm whenever saws or hydraulic cutters sever protected bars.

08

Panel-Removal Tamper

Trip integrated tamper switches instantly if intruders unbolt or dismantle grille panels.

03

Custom-Built Around Civil Maintenance and Control

09

Custom Opening Dimensions

Manufacture every grille to fit circular pipes, box culverts, vents, or secure windows.

10

3 Mounting Arrangements

Select fixed, rail-guided sliding, or swing-door frames to preserve dredging access.

11

Dry Shore IP66 Processor

Keep 12–30 VDC electronics (65 mA max) safely above water in IP66 enclosures.

12

Dual Relays and 4 LEDs

Provide 500 mA / 50 V alarm and fault NO contacts, RS-422, and 4 LEDs.

02 — Operating principle

Three Independent Detection Paths Built Inside One Physical Grille

PerimGrille FF-250 integrates optical and mechanical sensing directly inside a custom stainless-steel barrier so intruders cannot manipulate the opening without triggering an alarm.

3 Attack Vectors at 0 W Grille60–80 mm
01
3 attack vectors at 0 W grille
Path 01: pull / pry (60–80 mm)
Path 02: bar cut · Path 03: panel tamper
Wet-to-Dry Boundary Separation
02
Wet-to-dry boundary separation
Armored / conduit lead above high-water mark
Above-Water IP66 Processor
03
Above-water IP66 processor
Isolated ports / interfaces
TVS / GDT · I/O

First, pulling or prying the grille (60–80 mm deformation) transfers mechanical strain to pressure-sensitive optical fiber sealed inside the frame, altering the transmitted light signal. Second, sawing or shearing through a protected bar severs an internal anti-cut line. Third, unbolting or lifting a grille panel actuates a panel-removal tamper switch.

While the 0 W grille remains submerged in the waterway, 1 powered IP66 processor mounted above the waterline evaluates the signal and closes separate alarm or fault contacts.

03 — Underwater survival and flow immunity

Built to Stay Submerged Year-Round at 0 W—Without Falsing on Fast Water Flow.

Infrastructure security teams hesitate to put sensors inside culverts and canals for three practical reasons: electronics drown when water rises, fast storm currents shake flimsy nets into constant false alarms, and fixed bars block municipal dredging crews.

FF-250 resolves all three by engineering discipline.

Submerged Storm Flow
State A
Submerged storm flow
0 W stainless grille withstands flow + thermal shift
Water passes · Normal armed state
Underwater Breach Attempt
State B
Underwater breach attempt
60–80 mm pry / bar sawing / panel removal
Immediate intrusion alarm on shore
Scheduled Civil Dredging
State C
Scheduled civil dredging
3 mounts: fixed, rail-guided, or swing-door
Authorized access under control room disarm

Only the 0 W corrosion-resistant stainless-steel grille sits underwater year-round, while 1 IP66 powered processor mounts safely above high-water marks (-40°C to +70°C, 20–95% RH non-condensing).

Rigid bar construction withstands strong water-flow impact and adapts to normal thermal stress without nuisance triggers—alarming only on 60–80 mm prying deformation, bar cutting, or panel removal—while 3 frame styles (fixed, rail-guided, swing-door) preserve authorized maintenance access.

04 — Field deployment

Engineered for the boundary you operate.

Scenario 01 · Submerged Culverts Beneath Fences

Block Divers and Crawl-Through Intruders Where Culverts Cross Your Fence

Even the toughest perimeter fence fails if a storm culvert runs straight underneath the footing without underwater detection. FF-250 bolts a custom-fitted, 0 W corrosion-resistant stainless-steel security grille across the submerged culvert opening for continuous year-round underwater duty. Any attempt to pry bars by 60–80 mm, saw through a bar, or unbolt the frame alerts security immediately.

Plan this perimeter →
Submerged box-culvert closure beneath a perimeter fence
Perimeter Fence Above Grade
Perimeter fence above grade
Submerged box culvert route
Custom FF-250 stainless grille
0 W
60–80 mm pry / cut / tamper detection
04 — Field deployment

Engineered for the boundary you operate.

Scenario 02 · Utility Outfalls and Dredging Access

Choose Fixed, Rail-Guided, or Swing-Door Frames Around Civil Maintenance

Permanent welded grates over power-plant outfalls and substation drains force crews to cut bars with torches whenever silt or storm debris builds up. FF-250 offers 3 mounting arrangements—fixed, rail-guided sliding, and hinged swing-door—tailored to your civil access plan. Crews open sliding or swing-door grilles during authorized maintenance, while tamper switches guard every panel when armed.

Plan this perimeter →
Three engineered FF-250 mounting configurations
Fixed Installation
A
Fixed installation
B
Rail-guided installation
C
Swing-door installation
Panel tamper switch armed when closed
04 — Field deployment

Engineered for the boundary you operate.

Scenario 03 · Open Channels with Shifting Waterlines

Keep Open Industrial Canals Armed Across Dry Seasons and Storm Surges

Open cooling canals and refinery drainage channels swing between exposed dry concrete in summer and violent floodwaters during monsoon storms, blinding surface beams and tearing loose cable nets. FF-250 operates seamlessly above, across, and completely below shifting waterlines. Its rigid stainless-steel bars resist heavy water-flow impact and thermal stress while maintaining uninterrupted optical pry and cut sensing.

Plan this perimeter →
Shifting-waterline continuity across an open industrial channel
Low-Water / Dry-Bed Season
Low-water / dry-bed season
High-water submerged surge
Rigid stainless grille resists flow impact
Above-flood-line IP66 processor
04 — Field deployment

Engineered for the boundary you operate.

Scenario 04 · Tunnels, Vent Shafts, and Secure Windows

Custom-Fit Round, Rectangular, and Arched Apertures in Hardened Buildings

Underground utility tunnels, HVAC intake shafts, and ground-floor vault windows create odd-shaped structural openings that standard perimeter fences and indoor motion detectors catch too late. Every FF-250 grille is custom-sized to match circular pipes, rectangular ducts, or window frames. Intruders meet hardened stainless bars that report prying, cutting, or panel tampering before entering the room.

Plan this perimeter →
Custom aperture profiles for dry and wet openings
Circular Pipe / Drain Conduit
Circular pipe / drain conduit
Arched service tunnel
Rectangular ventilation duct
Secure-room window frame
04 — Field deployment

Engineered for the boundary you operate.

Scenario 05 · Dry-Bank Processing and SCADA / VMS Hand-Off

Keep Grilles 100% Passive Underwater and Active Electronics Dry in IP66 Housings

Sending technicians down wet manholes to troubleshoot drowned junction boxes is hazardous and expensive. FF-250 keeps the opening 100% passive at 0 W and places 1 IP66 processor per zone in an accessible dry location (12–30 VDC, 65 mA max, -40°C to +70°C, 20–95% RH non-condensing) with 4 LEDs, 500 mA / 50 V alarm and fault relays, RS-422, and TVS/GDT lightning protection.

Plan this perimeter →
Wet/dry architecture and processor diagnostics
Wet Zone · 0 W Submerged Grille
Wet zone · 0 W submerged grille
100% passive
Dry bank · IP66 processor
-40°C to +70°C, 20–95% RH
4 diagnostic LEDs + TVS / GDT surge arrestors
500 mA / 50 V alarm + fault relays and RS-422
05 — System architecture and bill of subsystems

What Goes Underwater at 0 W—and What Mounts on Dry Ground

Every PerimGrille FF-250 opening installation separates the custom 0 W stainless-steel sensing grille inside the wet or confined conduit from the powered IP66 zone processor positioned in a dry, accessible equipment location.

PASSIVE FIELD0 W (Unpowered)Submerged culvert, drain, canal, tunnel, vent, or window
Submerged Culvert / Conduit Opening
01
Submerged culvert / conduit opening
0 W grille
02
3 paths
Optical fiber + anti-cut line + tamper switch
03
3 frame options
Fixed / rail-guided / swing-door
04
Armored / conduit lead above high-water mark
POWERED BACKENDPoweredDry shore cabinet or indoor room above flood level
1 IP66 Zone Processor
05
1 IP66 zone processor
12–30 VDC, 65 mA max
06
NO alarm + fault relays (500 mA, 50 V) / RS-422
07
Site security control room / camera preset

System components and trade interfaces

Subsystem Layer
Components Included
Power Status
Location and Trade Scope
01 · Custom Stainless-Steel Grille
Individually sized corrosion-resistant stainless-steel security grille in 1 of 3 mounting styles: fixed, rail-guided sliding, or swing-door
0 W (Unpowered)
Submerged culvert, drain, canal, tunnel, vent, or window · Civil anchoring
02 · Embedded Triple-Path Sensors
Sealed pressure-sensitive optical fiber (60–80 mm deformation), internal through-bar anti-cut line, and panel-removal tamper switch
0 W (Unpowered)
Embedded inside grille bars and mounting frame · Factory-sealed assembly
03 · Above-Water Zone Processor
1 IP66 processor per zone with 4 LEDs, separate NO intrusion and fault relays (500 mA, 50 V), RS-422 port, and TVS/GDT surge protection
Powered (12–30 VDC, 65 mA maximum)
Dry shore cabinet or indoor room above flood level · SI termination
04 · Control Room Alarm / VMS Link
Perimeter alarm controller, SCADA RTU, or VMS platform receiving dry-contact alarm/fault inputs or RS-422 communication
Powered (Site security power / UPS)
Central control room or guard station · SI commissioning
06 — Technical specifications

PerimGrille FF-250 Full Engineering Specifications

Detection Performance
Parameter
Standard Specification
Sensing Principle and Grille Power
Embedded pressure-sensitive optical fiber + internal anti-cut line + panel-removal tamper switch; 0 W unpowered grille
3 Attack-Detection Paths
Path 1: pulling or prying grille bars; Path 2: cutting protected grille bars; Path 3: removing or dismantling grille panels
Deformation Trigger Range
60–80 mm structural deformation of the grille triggers an immediate alarm
Submerged and Flow Capability
Operates continuously year-round when fully submerged underwater; rigid barrier withstands strong water-flow impact
Thermal-Stress Adaptation
Adaptive compensation for normal structural thermal expansion and contraction stresses without causing false alarms
Grille Mechanics
Parameter
Standard Specification
Barrier Material
Corrosion-resistant stainless-steel rigid security grille construction
Dimensions and Protected Openings
Custom-manufactured to each opening: culverts, drains, sewers, open canals, tunnels, pipe conduits, ventilation ducts, and secure windows
3 Mounting Configurations
3 installation methods: fixed installation, rail-guided sliding installation, and swing-door hinged installation
Zone Processor
Parameter
Standard Specification
Deployment Ratio and Power
1 processor per detection zone (mounted above water); 12–30 VDC input voltage, 65 mA maximum current
Alarm and Fault Relay Outputs
1 normally open (NO) intrusion alarm contact (500 mA, 50 V) + 1 normally open (NO) fault alarm contact (500 mA, 50 V)
Data Communication
RS-422 communication interface
Local Status Indicators (4 LEDs)
4 LEDs: optical fiber alarm trigger, fiber break, system fault, and fiber transmission status
Surge and Lightning Protection
Transient voltage suppression (TVS) diodes and gas discharge tubes (GDT) on power inputs, data inputs, and relay outputs
Environmental Ratings
Parameter
Standard Specification
Above-Water Processor Enclosure
IP66 chassis protection; -40°C to +70°C operating temperature; 20–95% RH (non-condensing)

Above values reflect standard product technical specifications. Custom grille dimensions, frame mounting style, civil anchor bolts, and dry processor placement are matched to your opening drawings during design.

07 — Engineering FAQ

Questions Civil and Security Engineers Ask About FF-250

01Does the zone processor get mounted underwater alongside the FF-250 grille?

No—only the 0 W corrosion-resistant stainless-steel sensing grille mounts inside the wet or submerged opening. The powered IP66 zone processor (12–30 VDC, 65 mA max, -40°C to +70°C, 20–95% RH non-condensing) is always installed above the high-water mark in a dry shore cabinet or nearby equipment room.

02How do municipal or plant crews clear debris and silt without setting off alarms or cutting the grille?

Where periodic dredging or tunnel entry is required, specify rail-guided sliding or hinged swing-door mounting among the 3 installation styles. Operators temporarily disarm that zone in the control room while crews slide or swing the grille open, then re-arm panel tamper, anti-cut, and optical sensing once locked.

03When should we use PerimGrille FF-250 versus PerimTerra BF-300 across a shallow waterway?

Specify PerimGrille FF-250 when you want a rigid physical stainless-steel barrier that physically blocks entry while detecting 60–80 mm prying, bar cutting, and panel removal across culverts, drains, canals, or shafts. Evaluate PerimTerra BF-300 buried RF cable when an open shallow stream cannot accept a physical grate across the flow.

04Can FF-250 also secure dry ventilation shafts, pipe galleries, and ground-floor vault windows?

Yes—because every FF-250 unit is custom-sized and operates identically in dry air or submerged water, consultants routinely specify the same three-path optical, anti-cut, and tamper grille for dry HVAC intakes, utility tunnels, and high-security room windows.

08 — Next step

Get a Custom FF-250 Opening Schedule and Equipment Supply Quote

Send us your culvert, drain, channel, or shaft schedule. Our engineering team will size custom stainless-steel grilles for each aperture, recommend fixed, rail-guided, or swing-door frames, and map shore IP66 processor locations.

01Opening count, shape (round, box, open channel, duct, or window), and clear inner dimensions
02Operating environment: year-round submerged, seasonal storm flow, or dry structural shaft
03Access requirement across the 3 styles: fixed frame, rail-guided sliding, or swing-door
04Distance to the nearest dry above-water location for 12–30 VDC IP66 zone processors
Power and Water Utilities ↗Oil and Gas Refineries ↗Airports and Ports ↗Data Centers ↗How PIDS Technologies Work ↗Power Planning Guide ↗Installation and Maintenance ↗Compare All Products ↗