Applications · Commercial and logistics

Perimeter Intrusion Detection for Warehouses, Yards and Commercial Sites

Add detection to the fence you already have, and light it when something happens.

Site layout

What Goes Where on a Commercial Site

Most commercial sites already have a fence. The quickest improvement is to make that fence report climbing and cutting, then add light and a gate sensor.

A warehouse and logistics yard. Letters A to E mark the boundaries listed in the table.
A warehouse and logistics yard. Letters A to E mark the boundaries listed in the table.
BoundaryProductWhat It Does There
A Existing fence, up to 600 mPerimVibe VC-600A vibration-sensing cable fixed to the fence. One processor covers up to 600 m and locates an event within 3 m.
B Longer fence, fixed zonesPerimOptic FO-750Sensing fiber fixed to the fence, up to 4 zones of 300 m per processor. The processor can sit up to 20 km away.
C Fence lightingPerimLume LP-500Fence-mounted lights that go to full brightness or strobe when the fence is disturbed. Each light needs power.
D Vehicle gatePerimWave MW-400A microwave link across the gate lane, 5–200 m.
E High-value yardPerimTaut TW-100A physical barrier that alarms when a wire is pulled or cut.

Why PerimTaut

Where a Taut-Wire Barrier Fits on a Commercial Site

Most of a commercial perimeter is served well by sensors added to the existing fence. PerimTaut is for the part that holds the most value: a secure yard for loaded trailers, containers or stock.

It is a physical barrier and a detector in one. The detector draws 0 W, and PerimTaut is priced competitively against systems of the same tier, with fast dispatch.

Next step

What to Send Us

Send what you have. We reply with a preliminary zone proposal and equipment supply quote.

  • Enough to start

    1. Fence type and length
    2. Gate positions
    3. Photos of the boundary
    4. What is kept in the yard, and where