Applications · Estates

Perimeter Security for Estates and Private Residences

Detection that stays out of sight at the front, and a real barrier at the back.

Site layout

What Goes Where on an Estate

A private property wants its security felt, not seen. Concealed sensors cover the garden and the approach to the house. A barrier covers the sides nobody looks at.

A private estate. Letters A to F mark the boundaries listed in the table.
A private estate. Letters A to F mark the boundaries listed in the table.
BoundaryProductWhat It Does There
A Open lawn or gardenPerimTerra BF-300A buried cable with nothing visible above ground. Up to 800 m per processor, locating within 1 m.
B Paths, terraces and doorwaysPerimForce PM-280Pressure pads, mats and modules installed beneath paving, turf or floors.
C Front boundary fencePerimFence FF-200A security fence, 0.6–3.0 m high, with the sensing fiber concealed inside it.
D Rear wall or service yardPerimTaut TW-100A barbed taut-wire barrier that alarms when a wire is pulled or cut.
E Wall topPerimField EF-350Sensing wires that follow the wall line, in 2 zones of up to 150 m each per processor.
F Driveway gatePerimWave MW-400A microwave link across the gate, 5–200 m.

Why PerimTaut

Where a Taut-Wire Barrier Fits on an Estate

PerimTaut is a barbed barrier, and it looks like one. It belongs on the rear wall, the service yard and the boundaries away from the house.

There it needs little attention. The detector draws 0 W, the pull threshold is adjusted on site to filter out contact from animals and plants, and the barrier rarely suffers damage while its protective materials remain intact.

Next step

What to Send Us

Send what you have. We reply with a preliminary zone proposal and equipment supply quote.

  • Enough to start

    1. Property plan
    2. Wall and fence types
    3. Which sides face the public
    4. Photos of the boundary