Applications · Airports

Airport Perimeter Intrusion Detection

A taut-wire barrier for airside fence lines, with locating fiber for the long runs.

Site layout

What Goes Where on an Airport Perimeter

An airport perimeter runs for kilometres, with gates, crash gates and drains along it. Sections are often renewed while the airfield stays open.

An airport perimeter. Letters A to F mark the boundaries listed in the table.
An airport perimeter. Letters A to F mark the boundaries listed in the table.
BoundaryProductWhat It Does There
A Airside barrierPerimTaut TW-100A physical barrier that alarms when a wire is pulled or cut. The detector needs no power and is unaffected by EMI/RFI.
B Razor-coil toppingPerimTaut TW-150A razor coil with a sensing wire inside. It alarms when the coil is pulled or cut.
C Long existing fencePerimOptic FO-700Sensing fiber on the fence, up to 80 km per processor. It locates an event to about ±4 m and needs no power along the fence.
D Gates and crash gatesPerimWave MW-400A microwave link across the gate, 5–200 m.
E Fence gap during worksPerimWave MW-450MA portable, battery-powered microwave link, 5–200 m.
F Drainage culvertPerimGrille FF-250A fiber-sensing grille that closes the opening. It can be used under water.

Why PerimTaut

Why a Taut-Wire Barrier Suits the Airside Fence

PerimTaut is a physical barrier and a detector in one: the fence itself alarms when a wire is pulled or cut. The detector is mechanical, draws 0 W and is unaffected by EMI and RFI.

Airport fences are renewed section by section. For programmes like that, PerimTaut is priced competitively against systems of the same tier, with fast dispatch. The pull threshold is adjusted on site to filter out contact from animals and plants.

Next step

What to Send Us

Send what you have. We reply with a preliminary zone proposal and equipment supply quote.

  • Enough to start

    1. Perimeter length, section by section
    2. Fence types
    3. List of gates and crash gates
    4. Photos of the boundary