Keep Your Existing Fence. Locate Breaches Within 3 m Across 600 m.
Turn standing chain-link, welded-mesh, or palisade fencing into a precise locating perimeter without civil demolition. PerimVibe VC-600 monitors up to 600 m per IP66 processor, pinpoints simultaneous cuts and climbs within 3 m via high-speed DSP, and sustains protection after a cable cut through redundant communication.
Twelve Reasons Established Facilities Upgrade with VC-600
Pinpoint Intrusions on Existing Fences
600 m Single-Processor Reach
Monitor up to 600 m of existing perimeter fencing from one compact processor.
3 m Breach Pinpointing
Locate fence cutting, climbing, and pulling within 3 m for instant camera slew.
Simultaneous Multi-Point Tracking
Resolve multiple concurrent intruders along the fence without masking secondary breach points.
Software-Defined Operational Zones
Map flexible alarm sectors in software around gates, buildings, and camera presets.
Defeat Weather Noise and Cable Cuts
High-Speed DSP Discrimination
Sample reflected cable signals at high speed to separate breaches from wind noise.
Cut-Resilient Redundant Links
Maintain active perimeter protection after a cable cut using dual-ended A/B communication.
IP66 -40°C to +70°C Enclosure
Mount IP66 processors directly outdoors across -40°C to +70°C weather extremes.
TVS and Gas-Tube Surge Defense
Protect power and I/O ports with integrated transient suppression and gas discharge tubes.
Match Site Power, Fiber, and Relays
Multi-Fence Direct Retrofit
Attach sensing cable directly onto chain-link, welded-mesh, or palisade fences without trenching.
PoE, RS-422, or 10 km Fiber
Network processors via PoE Ethernet, RS-422, 2.2 km multimode, or 10 km single-mode fiber.
4 Onboard + 4 Expansion Relays
Drive local panels via 4 onboard relays plus optional 4-relay and 4-input cards.
2.0–2.5 W Host + 48 V Cable Power
Run 10–60 VDC processors at 2.0–2.5 W alongside a 48 V, 50 W cable supply.
How Minute Cable Deformation Pinpoints Fence Breaches Within 3 m
Attached directly along up to 600 m of fence fabric per processor and energized by a 48 V, 50 W sensing-cable supply, the VC-600 cable responds whenever an intruder cuts, climbs, or pulls the barrier.
That mechanical vibration causes minute physical deformation in the sensing cable, generating reflected electrical signals along the span.
Drawing just 2.0–2.5 W on 10–60 VDC, the IP66 processor samples those reflections at high speed, applies digital signal processing (DSP) to reject wind and rain noise, locates simultaneous intrusions within 3 m, and assigns each event to its software-defined zone.
A Snipped Fence Cable Does Not Silence Your Perimeter.
Security directors often hesitate to mount copper sensing cables on exposed perimeter fences because they worry one deliberate wire-cutter snip will blind hundreds of meters of boundary protection.
VC-600 eliminates single-path vulnerability with a redundant communication architecture across dual A and B side Tx/Rx links—supported on RS-422 copper, 2.2 km multimode fiber, 10 km single-mode fiber, and networked Ethernet layouts.
Cable connector / cable terminator / 48 V, 50 W supply
If a cable is severed, the processor immediately reports the cut event within 3 m while routing ongoing alarm traffic over the redundant path so remaining fence sections stay actively protected.
Engineered for the boundary you operate.
Turn Standing Industrial and Rail Fences into Smart Boundaries Without Civil Work
Airports, logistics hubs, and chemical parks surrounded by intact fences cannot afford civil demolition or weeks of open-perimeter construction just to add intrusion alarms. VC-600 fastens sensing cable directly onto existing chain-link, welded-mesh, or palisade fence panels across up to 600 m per processor. Software-defined zones let security teams align alarm boundaries with gates, loading bays, and guard posts—and resize sectors anytime without moving field hardware.
Plan this perimeter →Clear Hardware, Power, and Communication Roles Along Every 600 m Section
PerimVibe VC-600 upgrades existing fence lines using active fence-mounted sensing cable, compact IP66 field processors, dedicated cable power, and redundant communication links—giving civil, electrical, and security teams an unambiguous scope split.
System components and trade interfaces
PerimVibe VC-600 Full Engineering Specifications
Detection and Locating
Electrical and Surge Protection
Onboard and Expansion I/O
Communication and Environment
Above values reflect standard product technical specifications. Multi-processor chaining, 48 V cable power placement, and redundant communication ring media are finalized against your fence layout during project design.
Common Questions Before Specifying VC-600
01When should we choose VC-600 vibration cable versus FO-750 or FO-700 fiber-optic fence sensors?
Choose PerimVibe VC-600 when upgrading 300 m to several kilometers of standing fence where 3 m breach location, software-defined zones, outdoor IP66 processors, and flexible PoE, RS-422, or fiber networking fit your power layout. If your fence perimeter must remain 0 W unpowered due to flammable gas zoning or extreme HV EMI, select PerimOptic FO-750 (4 × 300 m zones) or PerimOptic FO-700 (up to 80 km fence locating).
02How should electrical engineers budget field power for VC-600 processors and sensing cables?
Keep the two figures separate in your power schedule: each VC-600 processor accepts 10–60 VDC (or optional PoE) and consumes just 2.0 W alone or 2.5 W with a communication card, while the sensing-cable power supply is rated at 48 V, 50 W. Our team maps exact power injection points on your perimeter drawing.
03How does VC-600 scale past 600 m and integrate sliding gates along an industrial perimeter?
Multiple 600 m processors chain seamlessly across multi-kilometer fences via PoE Ethernet, RS-422, 2.2 km multimode fiber, or 10 km single-mode fiber with A/B redundancy. At vehicle gates, wire gate contacts directly into the processor's 2 auxiliary dry-contact inputs (or the optional +4 supervised-input card), or pair the gate span with a PerimWave MW-400 microwave link (5–200 m).
04Does the 0.125–10 s specification describe intrusion detection latency or relay output hold time?
VC-600 performs real-time intrusion detection and 3 m location through high-speed signal sampling and DSP analysis. The 0.125–10 s setting defines the adjustable activation hold duration for the 4 onboard Form C relays (1 A, 30 VDC), ensuring reliable contact latching across diverse third-party alarm panels and NVR inputs.
Get a Preliminary VC-600 Retrofit Layout and Equipment Supply Quote
Share your existing fence length, panel type, and network preference. Our engineering team will map 600 m processor sections, 48 V power placement, redundant communication cards, and prepare an equipment supply quotation.