Applications · Solar and storage

Perimeter Intrusion Detection for Solar Farms and Battery Storage

Long fence lines located to within a few metres, and an unpowered barrier around the storage compound.

Site layout

What Goes Where on a Solar and Storage Site

A solar farm has a long outer fence and few people on site. The battery compound and the grid connection yard are the high-value points inside it.

A solar farm with battery storage. Letters A to E mark the boundaries listed in the table.
A solar farm with battery storage. Letters A to E mark the boundaries listed in the table.
BoundaryProductWhat It Does There
A Long outer fencePerimOptic FO-700Sensing fiber on the fence, up to 80 km per processor. It locates an event to about ±4 m and needs no power along the fence.
B Grid connection yard fencePerimOptic FO-750Sensing fiber in fixed zones, up to 4 zones of 300 m per processor.
C Battery and inverter compoundPerimTaut TW-100A physical barrier that alarms when a wire is pulled or cut. No power is needed at the detector.
D Site entrancePerimWave MW-400A microwave link across the gate, 5–200 m.
E Unlit fence sectionsPerimLume LP-500Fence-mounted lights with a vibration alarm. Each light needs power.

Why PerimTaut

Why a Taut-Wire Barrier Suits a Storage Compound

Solar and storage sites are remote, so every unnecessary call-out costs a journey. The PerimTaut pull threshold is adjusted on site to filter out contact from animals and plants.

The detector is mechanical, draws 0 W and is unaffected by EMI and RFI. The barrier rarely suffers damage while its protective materials remain intact, which suits a site that is visited only occasionally.

Next step

What to Send Us

Send what you have. We reply with a preliminary zone proposal and equipment supply quote.

  • Enough to start

    1. Perimeter length
    2. Fence type and height
    3. Site layout showing the battery compound and grid connection yard
    4. Where the control building is